When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
6V 12V 24V Car Battery Tester Digital Analyzer Auto Battery Load Tester Cranking
TE503 6V 12V 24V Car Battery Tester
1.Works on 6V 12V 24V batteries, battery ratings from 100 - 2200 CCA,including starter and alternator.
2.Reverse connection protection, even positive and negative are inversely connected, you still no need to worry about battery damage.
3.Test result: SOH, SOC, CCA value, CCA rating, voltage,etc.
4.If the clip is not properly clamped,the screen will flicker,just re-clamp it.Clip properly clamped screen will not flicker. Perfect for beginner
Know your battery conditions in advance before it dies!
☆Plug and play: Press button to switch battery type and press ok button to confirm.Then input the rated battery capacity,BM550 will start analyzing the battery
☆Use TE503 to see whether your car battery is OK.
Good:The battery is in good condition, feel free to use.
Normal: General state of the battery may continue to use.
Poor: The battery is in poor condition, please replace it in time .
FUCTION:
1.Work on 6V 12V 24V Batteries
Perfect for: Cars, SUVs, Pickups, Boats, Motorcycles, Trucks and Golf Carts and more
2.SOH Test
Display state of health, the readable analysis results on 1.8 inch blacklit screen
3.SOC Test - Display state of charge
High precision amplifier and calibrated by professional instruments give you the reliable results in seconds!
4.R(Internal Resistance)
An easy way to analyze the battery cell health status
5.VOL(Battery Voltage)
Over-voltage, short circuit and spark proof protection. Don't need to worry about battery and equipment damage
6.In -Vehicle & Out-of-Vehicle
Support both in-vehicle and out-of-vehicle tests, no need to remove the battery from the vehicle. provide you with more accurate test results quickly, thus replacing the bad cell in time.
Features:
1. Identify battery status Good or Replace
2. Check Battery Capacity - Cold Cranking Amps (CCA), BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB information relative to battery rating.
3. Check Internal resistance value (Ohm)
4. Display battery life in percentage (%)
How to test your Battery？
Package including: 1pc × TE503 Car Battery Analyzer Main Unit
