When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a listing to Order a vintage reissue made by hand following the Fender standardicludes all you need just to bolt on and play!
the finish is nitro
Hard rock maple flat sawn cut or rift sawnTuners are included in heavy relic finish, I use the Fender vintage tunersBone nut set up is also includedslab or veneer AAA Indian rosewood fretboard 1/4"face clay dots, or 7mm abalone, Mother of pearl2mm or 2.5mm side dots
Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall) if you need a different fret wire just message me0.79" at first fret to 0.99" at 12th fret (your choice of thickness)9.50" or 7.25" fretboard radius2.20" neck heel width1/4" X 11/32" two step tuning pegs holes
vintage single acting truss rod with the correct nutoval C, large C, soft V or hard V profileFrets are polished, leveled and rounded edgesthis is a custom neck made by hand with high quality materials.You place the order and can message me to discuss the vintage specs you want,the construction is between 12 to 16 weeks, but it can be more if I have over 12 orders ahead,I you want a detailed relic job, please message me.
$25 priority mail with signature confirmation (local shipping)International buyers will be calculated Priority Int
I construct this kind of necks following the vintage Fender specs the best I can,if you want a custom made vintage style neck, message me.I have the 2 pcs available and 1 piece, also the 70's style too (bullet) take a look in my store.
Thank you!
