When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is the Auger connection
Both pigtails $39.99
plug pigtail $20.49receptacle pigtail $19.99sealing caps $10The sealing caps are the mate connectors with cavity plugs in them to seal out weather when the salt implements are not in use. Keep them in your glovebox in their bag until use.
Replaces Buyers 3017233. You can repair the harness # 3006724 with these.
Nothing is worse than being out salting and your salt spreader auger stops working. Our easy connect repair harnesses make it simple for you to cut, crimp, and heat the shrink so you\'re back in business!
These connectors were crimped with german tooling using OEM Aptiv or Delphi by Aptiv terminals, seals, and connectors sourced from North America or Europe. The wire was sourced in the US, containing North American components, as was the labor (US). The wire is copper multistranded 10 gauge TXL, which is flexible however is also stiffer and more durable than some of the cheaper UL listed wire used by other manufacturers. It is more resistant to salt spray and other harsh environmental exposures. While it may have less insulation material and is smaller in outer diameter, it is mechanically superior to the more supple insulation used in other wire, and contains the same amount of copper.
The heat shrink splices are yellow sized for 12-10AWG wire and are Molex brand Permaseal wire splices with CoO: USAAll connectors were professionally crimped and give you 12\" of wire that meets SAE J-1128, Ford (M1L-123A), and Chrysler (MS-8288) specifications for wire gauge, quality, and insulation material, durability. This easy-to-connect repair pigtail harness is used to repair your existing wire harness on your SHPE or PRO series Buyers SaltDogg hopper spreader.
