When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CUSTOM LENGTH 6-32 SCREW KIT for mounting your Red Dot optic or for other use.
I had all these screws Custom-Made to order.
THE LENGTHS OF THESE SCREWS ARE MUCH LONGER, CHECK THE LENGTHS OF THESE SCREWS AND MAKE SURE YOU KNOW WHAT YOU NEED.
PLEASE READ: The head diameter of these screws is smaller than the standard, so the screw will sit approximately 2 threads deeper in the hole. So, for example; the 12.25mm screw is basically your 1/2\" screw.
You Will Not find these screws ANYWHERE but here.
Custom lengths for Perfect fits.
- Screw Specifications:
- Grade 12.9 Alloy Steel (Most other screws are Grade10.9 or even 8.8)
- Quenched and Tempered (For Strength)
- Minimum Tensile Strength of 1220MPa (177,000 PSI)
- Black Oxide Coated
- Head Diameter slightly smaller for a more perfect fit.
- T10 Torx Drive Head
- You will receive:
- (2) 6-32x12.25mm (0.482\")
- (2) 6-32x14.00mm (0.551\")
- (2) 6-32x15.70mm (0.618\")
- (2) 6-32x18.80mm (0.740\")
Shipping isFastvia USPS withTracking.Go to the USPS website to track your order and NOT . does not update as often as the USPS.Thank You
