When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Features: - Modular front and rear shock towers (FRONT: 8mm of upward/downward adjustability, REAR: can accommodate links ranging from 69-105mm+) - Dynamic skid angle (17-20 degrees. As the rear tower extends, it also steepens the skid angle. This means that increasing rear link length proportionally increases your skid angle as well) - Flexible wheelbase, easily switch between short and stretched wheelbase configurations - Adjustable delrin rear electronics tray - Magnicorn mounts - Updated delrin skid to reduce hang-up - Redesigned delrin front brace/battery tray - Closer hole spacing on front shock tower for more fine-tuning
Chassis Kit Includes: - 2x Carbon fiber chassis rail sets (top, base and rear pieces) - 2x Delrin sliders - 1x Delrin skid - 1x Delrin front chassis brace - 1x Delrin rear adjustable tray - 2x Mangnicorn mounts - 8x 6mm magnets - 20x M1.4*6 screws
CAPABILITY: 7.5/10 BUILD DIFFICULTY: 7/10 VERSATILITY: 8.5/10 BOA COMPATIBILITY: 2.5/10 CARRIER BEARING COMPATIBILITY: 9/10
NOTES: This chassis is best suited for experienced builders- not recommended for first timers (although you can try!) There are a multitude of ways to set this chassis up. I recommend 45mm-50mm front links (45s if you run a smaller tire, 50s if you run 62mm+). Recommended carrier bearing use with links 85mm+ in the rear.
