When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fast and Free shipping from Michigan. Super fun project. Simply solder pieces together as shown, clamp it onto a keg or Robobrew type unit, and turn on the heat.
2" stainless tri clamp and gasket included.
All other parts are copper and are cut and bored out to length and shipped to you to easily solder together.
Attach right to a beer keg or any 2" tri clamp milk can.
Attach to Robobrew, Grainfather, Turbo 500, Digiboil or Mash & Boil Electric Stills lids by purchasing this adapter.
Link to Stainless Column Extension (so this can be a reflux still if wanted):Stainless 2" Tri-Clamp Extension Tube - 11" long/tall Tower Still Spool Filter
Link to Copper Column Extension:2" x 12" Copper Pipe Tri-Clamp Ferrule Keg Still DIY Column Extension Kit Spool
Link to Robobrew Lid Adapter:Weld-less 2" Tri Clamp Bulkhead - Fits Robobrew Brewzilla Turbo 500 Digiboil etc
Link to spare clamps:2" Tri Clover Clamp 304 Stainless Fits Sankey Keg, Moonshine Distilling Columns
Link to Screen Gasket (for holding in copper mesh or saddles):2 in. Tri-Clamp Gasket with Stainless Mesh Screen - Distilling Carbon Filter Gin
Link to Copper saddles:Still Spirits T500 Copper Saddles 100 g Moonshine Ethanol Reflux Purifying mesh
Link to Stainless saddles:Still Spirits T500 Stainless Saddles 500g Moonshine Ethanol Reflux Packing
Link to Sight Glass Column Extension section:Stainless 2” Sight Glass Kit Tri Clamp Brewing Distilling Pump Or Column Window
Link to Robobrew Lid (Also fits Digiboils and Grainfather):Distillation Lid for Robobrew, Grainfather or Digiboil - Homebrew Beer Moonshine
Link to 110V Digiboil (most popular):DigiBoil Electric Kettle - 35L/9.25G (110v)- Beer Brewing, Distilling All In One
Looking to attach it to a Grainfather, Robobrew, Turbo 500, Digiboil, Anvil Foundry, or any pot or kettle with a hole in the lid? Check out this cool coupling!Looking to add a different still style="font-family: Arial; font-size: 14pt;">Link to Mini Reflux Beer Keg style="font-family: Arial; font-size: 14pt;">Link to Copper Pot Still Beer Keg style="font-family: Arial; font-size: 14pt;">Link to Jumbo Copper Beer Keg style="font-family: Arial; font-size: 14pt;">Link to 220V Digiboil (very powerful):DigiBoil Electric Kettle - 35L/9.25G (220v)- Beer Brewing, Distilling All In One
Column is 2" copper, condenser is 1/2" copper pipe with a 3/4" jacket.
Thermometer is threaded and screws right in tothe 1/2" female npt with a few wraps of Teflon tape to seal.
• Large high quality Dial thermometer included. (thermometer may vary from pictures)
• Thermometer connection 1/2" NPT Lead Free brass thermowells with set screw
• Thermometer can be calibrated
Thermometer attaches by simply screwing in and is easily removed for cleaning. (a few wraps of teflon tape is necessary for npt)
We buy in bulk so you save. We are very proud of this low cost kit. Please don't hesitate to ask if you have any questions or variations needed.
Chilling water inlet and outlet left open for your specific needs. Easiest way is to attach to a garden hose or our 1/2" silicone tubing.1/2" ID x 3/4" OD Thick Wall Silicone High Temp Hose (500F) Tubing for Robobrew
