When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BANZ RC
FSR MODEL GT
1/7 Scale 4WD Brushless RC Car — 6S / 8S RTR
LOW, WIDE GT STANCE | MECHANICAL HANDBRAKE | FSM GYRO
1/7Large-Scale GT4WDFour-Wheel Drive6S / 8STwo Power ConfigurationsGYROFSM Stability System BATTERY & CHARGER NOT INCLUDED.
Choose your color and 6S or 8S configuration in the listing. The motor, ESC and steering servo differ by version. A compatible LiPo battery setup and balance charger are required separately.
CHOOSE YOUR POWER
The same GT platform, with two distinct brushless electronics packages.
Configuration6S RTR8S RTRMotor4274 2000KV brushless4985 1250KV brushlessESCHobbywing 150AHobbywing MAX6 160ASteering servo18KG digital metal-gear25KG digital metal-gearMaximum cell count6S LiPo8S LiPoApprox. top speed110 km/h160 km/hBattery connectorXT90XT90Battery & chargerNot includedNot included
Stated speeds are approximate; actual results vary with battery setup, gearing and driving conditions. Select the required version before purchase and stay within its voltage limit.
MECHANICAL HANDBRAKE
A dedicated mechanical linkage locks the rear wheels to help initiate slides and tighten your turning line.
Explore a different side of GT driving, with handbrake turns and controlled slides in a clear area away from traffic and people.
LOW STANCE.
DISTINCTLY GT.
A sweeping roofline, sculpted sides and a rear wing give Model GT its low, wide road-car presence.
The impact-resistant polycarbonate body combines detailed styling with a lightweight shell. MODEL GT lettering completes the look.
SCULPTED REAR WING & GT DETAILS
The sculpted rear wing gives Model GT a distinctive rear profile, complementing its low roofline and wide stance.
Twin stripes and MODEL GT lettering finish the rear body with a coordinated GT look.
7075-T6 DIAGONAL CHASSIS BRACE
A 7075-T6 aluminum diagonal brace forms a triangular support within the chassis.
This layout helps distribute impact loads and adds structural support during demanding driving.
6061 ALUMINUM CENTER REINFORCEMENT
The center brace reinforces the connection between the front and middle chassis sections.
Its 6061 aluminum construction adds support to help maintain steering accuracy and suspension geometry under load.
7075-T6 ALUMINUM SHOCK TOWERS
Rigid 7075-T6 aluminum shock towers provide a firm mounting base for the upper shock mounts.
They support the suspension mounting geometry through repeated suspension movement and driving loads.
3 MM ALUMINUM CHASSIS.
CLEAN, FLAT UNDERSIDE.
A 3 mm 6061-T6 aluminum chassis forms the foundation of the GT platform. Countersunk fasteners keep protruding screw heads out of the underside.
Rounded edges and a sculpted rear section complete the clean underbody layout.
REINFORCED TIRES.
WIDER AT THE REAR.
An internal fabric layer helps limit tire ballooning at high rotational speeds, supporting a more consistent tire shape.
The wider rear tires complement the GT stance and provide support during acceleration, braking and cornering.
ADJUSTABLE SUSPENSION
Threaded shock bodies and spring collars let you adjust the suspension setup.
Soft, medium and hard spring sets are supplied, giving you options for different surfaces and driving preferences.
V2 MOTOR MOUNT & TUNABLE GEARING
The motor mount accommodates motors up to 49 mm in diameter and 100 mm in length.
A 19T–27T pinion range offers gearing choices for acceleration or speed-focused setups. Alternative motors and pinions are upgrade options, not a list of included parts.
Check motor and ESC temperatures after gearing changes.
LIGHTING THAT FOLLOWS YOUR CONTROLS
LED headlights, front and rear indicators, and brake lights bring the GT body to life.
Brake lights respond to braking, while the indicators flash with steering input. The FSR GT15G radio also provides gyro and lighting control.
DUAL-SIDE BATTERY LAYOUT
The 155 × 52 mm battery bays support flexible pack placement. Confirm battery dimensions, voltage and connectors before purchase.
The vehicle has two battery connections. Single-pack operation requires the supplied XT90 shorting plug in the unused connection. Confirm the correct wiring arrangement before use.
UNDER THE GT BODY
6S chassis shown. The 8S version uses different electronics. Battery and charger are not included.
CHASSIS & CONTROL SPECIFICATIONSModelFSR Model GTScale / Drive1/7 / 4WDDimensions710 × 350 × 200 mmWheelbase410 mmGround clearance15 mmChassis3 mm 6061-T6 aluminumFront wheel size100 × 43 mmRear wheel size107 × 53 mmBattery bay dimensions155 × 52 mmRadioFSR GT15GStated control rangeUp to 300 m, conditions dependentShock towers / Diagonal brace7075-T6 aluminumCenter brace6061 aluminumGyroFSM stabilization systemHandbrakeMechanical rear-wheel locking system WHAT\'S INCLUDED
- 1 × FSR Model GT RTR vehicle in the selected color and power configuration
- Motor, ESC and steering servo for the selected 6S or 8S version
- FSR GT15G radio system
- XT90 shorting plug for single-battery operation
- Soft, medium and hard suspension spring sets
REQUIRED SEPARATELY
Compatible LiPo battery pack(s) and a suitable balance charger. Match the cell count, connector and physical fit to the selected version. For a two-pack setup, use matched packs and confirm the total system voltage and wiring.
SHIPPING & SUPPORT
Please refer to this listing for current shipping charges, item location, estimated delivery and return terms.
For help choosing between 6S and 8S, or checking your battery setup, contact Banz RC through messages before purchase.
GT PRESENCE. BRUSHLESS PERFORMANCE.
A low, wide 1/7-scale platform with 4WD, a mechanical handbrake, reinforced chassis components and your choice of 6S or 8S electronics.
Choose your color and power configuration in the listing.
