Feuling Vented Oil Dipstick Black #3092 Harley Davidson For Sale

Feuling Vented Oil Dipstick Black #3092 Harley Davidson Product Details

• Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PVC style breather consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
• Screws into the factory oil fill spout as a stock replacement part
• These breathing dipsticks remove unwanted build-up of blow by pressure, all internal combustion engines have a certain amount of blow by
• Larger cubic inch, worn and or loose ring clearance as well as engines pushed to their limits generally have increased blow by
• Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced back into the oil tank
• Dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System
• Feuling test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by
• Dipsticks vent/breath excessive crank case pressure from the oil tank through a breather system consisting of a oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
• Includes two venting styles options to choose from when installing the dipstick
• Option 1: 1/8" NPT breather vent fitting with internal porous filter element (this option gives a clean look, however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by)
• Option 2: Quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, however this option does requires disconnecting the fitting in order to check the oil
• Option 2 is Feuling's preferred option as it breathes more than Option 1
• For Option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail
• Checking oil level: There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
• FHS = FULL HOT STAND: if reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
• FHU = FULL HOT UPRIGHT: when reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
• Available in polished or fade-resistant black
• Made in the USA

Fit GuideModelVented Oil DipstickColorBlackCountry of OriginUSAMaterialAluminumQuantityEach Product Fitment

This item fits the following applications:

Harley Davidson FLHR Electra Glide Road King 2007-2016Harley Davidson FLHR Road King 2007-2016Harley Davidson FLHRC Road King Classic 2007-2013Harley Davidson FLHRS Road King Custom 2007Harley Davidson FLHT Electra Glide 2007-2009Harley Davidson FLHT Electra Glide Standard 2007-2009Harley Davidson FLHTC Electra Glide Classic 2007-2013Harley Davidson FLHTCU Electra Glide Ultra Classic 2007-2016Harley Davidson FLHTCU Ultra Classic Electra Glide 2007-2016Harley Davidson FLHTCUL Electra Glide Ultra Classic Low 2015-2016Harley Davidson FLHTCUTG Tri Glide Ultra Classic 2009-2016Harley Davidson FLHTK Electra Glide Ultra Limited 2010-2016Harley Davidson FLHTKL Electra Glide Ultra Limited Low 2015-2016Harley Davidson FLHX Street Glide 2007-2016Harley Davidson FLHXS Street Glide Special 2014-2016Harley Davidson FLHXXX Street Glide Trike 2010-2011Harley Davidson FLRT Freewheeler 2015-2016Harley Davidson FLTR Road Glide 2007-2009Harley Davidson FLTRU Road Glide Ultra 2011-2013, 2016Harley Davidson FLTRX Road Glide 2007-2009Harley Davidson FLTRX Road Glide 2015-2016Harley Davidson FLTRX Road Glide Custom 2010-2013Harley Davidson FLTRXS Road Glide Special 2015-2016 Shipping

We guarantee your satisfaction, that’s why our team works hard to get your gear to your door as fast as possible. All items you purchase from PartsGiant are brand new and professionally packaged for safe delivery to your door.

International Shipping:

Import taxes, duties and other charges vary by location and are the sole responsibility of the buyer. Please check with your country's customs office to determine what these costs may be prior to purchasing.

Payments

We accept PayPal for all transactions.

We are required to collect a 6% sales tax for Michigan residents only.