Genuine DJI Flip Intelligent Flight Battery 2 Packs with Parallel Charging Hub For Sale

99% new Battery, 95% new Charging Hub.

🔋 DJI Flip Intelligent Flight Battery(2 pack) with DJIFlipParallel Charging Hub

3110 mAh / 22.3 Wh per Battery — ~31 Min Flight, 2‑Battery Parallel Charge in 70 Min (65W PD), Power‑Bank Mode

✅ Compatible Products

• DJI Flip

📦 In The Box

• 1 × DJI Flip Parallel Charging Hub

• 2 × DJI Flip Intelligent Flight Battery

Note: Charging cable not included 🔍 Product Overview

The DJI Flip Parallel Charging Hub + 2× Flight Battery Kit is the complete power solution for the DJI Flip foldable drone.

Each Li‑Ion Intelligent Flight Battery delivers ~31 minutes maximum flight time (lab: windless hover, 25°C, camera off — typical real‑world 25–28 min depending on wind & flight style). The Parallel Charging Hub stores up to two batteries and — when powered by a ≥65W USB‑PD charger (15V⎓4.3A) with a ≥5A E‑marked PD cable — charges both batteries simultaneously, taking ~70 minutes to fully charge two from 0%. With at least one battery inserted, the hub also works as a power bank (USB‑A/USB‑C output) to top up your goggles, remote controller or smartphone from remaining battery power.

✨ Key Features ✈️ DJI Flip Intelligent Flight Battery

• 3110 mAh / 22.3 Wh / 7.16 V Nominal / 8.6 V Max Charge

• ~31 Min Max Flight / ~25–28 Min Typical Real‑World (varies with wind, speed & camera use).

• Smart BMS reports cell voltage, temp & cycle count in DJI Fly app.

• Auto‑storage discharge to ~60 % after 10 days idle.

• Weight: ≈ 83.5 g per battery — compact and light.

⚡ Parallel Charging Hub — Simultaneous 2‑Battery Charge

• True Parallel Charge: With ≥65W PD source (15V⎓4.3A) + ≥5A E‑marked C‑C cable → charges 2 batteries at the same time.

• 2 batteries 0→100%: ~70 min (with 65W PD).

• 1 battery 0→100%: ~45 min (with 65W PD).

• With <65W charger: hub falls back to sequential (one‑at‑a‑time) charging.

• Power‑Bank Mode: With ≥1 battery inserted, hub outputs remaining battery power to charge phones, goggles or RC — great for field top‑ups.

• Storage & Carry: Holds 2 batteries securely; LED per‑slot shows charge status.

🔘 Smart Indicators

• Per‑Battery LEDs: Show charging progress / stored charge level.

• Hub Status LED: Indicates input power detection and charging mode (parallel vs. sequential).

⚙️ Technical Specifications DJI Flip Intelligent Flight Battery
DJI Flip Parallel Charging Hub
💡 Usage Tips

• Fastest Turnaround: Use DJI 65W PD charger + ≥5A E‑marked C‑C cable → plug into hub with 2 batteries → both charge in ~70 min.

• Power‑Bank Use: Insert a partially‑charged battery → connect phone/goggles to hub output for emergency top‑up.

• Flight Rotation: 2 bats = ~50–56 min total available airtime before recharging.

• Pre‑Flight: Short‑press battery button to confirm ≥ 3 LEDs (≥75 %) before arm. Land on first low‑bat warning.

• Storage: Leave batteries in hub — auto storage management engages if >10 days idle.

⚠️ Important Notes

• DJI Flip EXCLUSIVE: ❌ Batteries & hub are NOT compatible with Mini 4 Pro / Mini 3 / Air / Mavic series — different voltage, connector & BMS protocol.

• Parallel Charge Requirement: True simultaneous 2‑battery charging requires ≥65W PD (15V⎓4.3A) source + ≥5A E‑marked C‑C cable. With lower‑wattage chargers the hub charges batteries one at a time (sequential).

• Li‑Ion Handling: Inspect for punctures, swelling or damaged contacts before each use. Do NOT use if swollen.

• No Deep Discharge: Land before voltage alarms; over‑discharge permanently damages cells.

• Charging Safety: Charge on non‑flammable surface; never leave unattended. Use DJI‑specified or quality PD charger.