When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Genuine EFI ES-2000 Spectrophotometer Handheld Device, Cradle & Cable
This listing is for a handheld EFI ES-2000 spectrophotometer main unit. It includes a USB cable adapter but DOES NOT come with its original factory-matched calibration cradle, case, or other original accessories.Complete Results of the iEFI Diagnostics are attached in the pics. Unit powers on and LED works. Instrument inspection: Successful and Button Test Successful.
**Important Technical Note for Buyers:**As color professionals know, these instruments are factory-matched directly to the unique white tile inside their specific original calibration cradle. Because the matching cradle is missing, this unit WILL NOT pass standard white-tile calibration out of the box in your software unless you have a method to re-profile or re-mate the hardware to a reference tile, or plan to use it for internal hardware replacement parts.
**What is Included:**(1) EFI ES-2000 Spectrophotometer Main Handheld Unit(1) Calibration Cradle / White Tile Base(1) USB Connection / Interface Cable
**What is NOT Included:*** NO Software, Carrying Case, Target Holders, or Ambient Light Caps
**Cosmetic & Functional State:**The exterior housing is in clean, used condition with normal light wear from careful handling. The lower optics aperture glass is intact and clean. The device successfully powers up and communicates with a host computer when connected via USB, but full color calibration has not been performed due to the missing cradle. Sold strictly AS-IS / FOR PARTS OR REPAIR.
Please review all photos carefully before purchasing. Fast shipping!
General Information
Date and Time: 9/22/2026 6:58:04 AM
Application version: 4.2.5.381, 32-bit
SDK version i1Pro: 4.2.4.5061
SDK version i1iO: 2.2.4.5061
SDK version i1Pro3: 1.0.15.5919
SDK version i1iO3: 1.0.15.5919
SDK version i1iSis: 2.0.0.4968
SDK version ColorMunki: 1.0.3.4630
SDK version i1Display2: X-Rite, Inc. SipCal Library Ver. 7.3.7 (32 bit)
Platform: Microsoft Windows 10, 64-bit
Open instrument
Connection: Successful
Open instrument: Successful
Instrument information
Instrument inspection: Successful
Serial number i1Pro: 7083483
Type: i1Pro
Revision: E
Firmware version: 634
CPLD version: 999
Dark measurement count: 13
Lamp burning time: 48.0 seconds
Spot measurement count: 4
Scan measurement count: 7
Factory calibration: 5/16/2019
Spectral Module ID: 01-9103f91a000037
Supplier: 'EFI-ES2000'
Recertification date: -
Instrument Licenses
Measurement Modes: [Reflectance Spot, Reflectance Scan, Emission, DualReflectance Spot,
DualReflectance Scan]
Licensed functionality: [Has UV LED, Has Wavelength LED, Has Zebra Ruler sensor, Max Ruler
Length = 300 mm, Has Indicator LED, Spectral values, Tristimulus, Density]
Licensed Modules:
i1Match Module "Scanner": NOT licensed
i1Match Module "Monitor": licensed
i1Match Module "Printer": NOT licensed
i1Match Module "Printer RGB only": NOT licensed
i1Match Module "Printer CMYK only": NOT licensed
i1Match Module "Beamer": NOT licensed
i1Match Module "Printer Easy RGB": NOT licensed
i1Match Module "Printer Easy CMYK": NOT licensed
i1Match Module "Digicam": NOT licensed
i1Match Module "Editor": NOT licensed
i1Profiler Module "Display Profiling": NOT licensed
i1Profiler Module "RGB Printer Profiling": NOT licensed
i1Profiler Module "CMYK Printer Profiling": NOT licensed
i1Profiler Module "Printer QA": NOT licensed
i1Profiler Module "Advanced-Mode": NOT licensed
i1Profiler Module "Projector": NOT licensed
Button test: Button: Successful
Emission test: Emission calibration: Successful
Instrument emission measurement
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission: Successful
Button test Button: Successful
Noise Tests: Noise measurements: Successful Noise result: Successful
Reflectance test
Reflectance Spot calibration: Successful
Reflectance Spot measurement 1: Successful
Reflectance Spot measurement 2: Successful
Reflectance Spot measurement 3: Successful
Reflectance Spot measurement 4: Successful
Reflectance Spot measurement 5: Successful
Reflectance Spot measurement 6: Successful
Reflectance Spot measurement 7: Successful
Reflectance Spot measurement 8: Successful
Reflectance Spot measurement 9: Successful
Reflectance Spot measurement 10: Successful
Lamp test: Successful
Reflectance drift test : Successful
Reflectance Scan calibration : Successful
Dual Reflectance Spot calibration: Successful
Dual Reflectance Spot test: Successful
Dual Reflectance Scan calibration: Successful
