Gymshark Heat Transfer pack of 4 Iron On Logo 2\" pick your color sports diy For Sale

• ***SHIPPING INFO***
• Standard Mail usually takes 3-7 business days (Free)
• Priority Mail usually takes 3-4 business days
• Please note that USPS does not guarantee their shipping times and delays do happen from time to time. Seller is not responsible for any shipping delays.
• we will always make sure you get what you ordered or money back

instructions:

Fabrics That May Or May Not Be Used!

YES: cottons, cotton blends, wool, silk, velveteen, velour, denim (the softer the better), t-shirts and sweatshirts are probably your easiest fabrics; lycra, slinky (a little trickier, but possible), cotton sweaters are easiest. Always test fabrics if you’re not sure, read the garment hang tag.

NO: nylon jackets, velvet, acrylic, leather, vinyl, trigger (fabrics with a finish). Don’t forget to read the hang tags.

Always iron on a hard, flat surface (no padded ironing board). Lay out your garment.

Place the sticky side down onto fabric. If not in the desired place, you may pick up the design and place it again and again. Cut it apart, change it, nothing is permanent until you press it on.

Put the pressing cloth over the design.

Set your iron on a wool setting – NO STEAM. Temperature may be adjusted as needed. All irons are different.

Place your iron on the pressing cloth on top of the design. Your iron will sit there a minimum of 30 – 45 seconds. Do not move your iron. Let it sit in place. This makes you nervous. BUT – the length of time and your temperature is what is melting the glue. Make sure your iron sits there long enough. If it sits there long enough and the glue isn’t getting melted, then the temperature of your iron will need to be adjusted. THIS A COLD PEEL WAIT TILL IS FULLY COLD BEFORE PEELING

Copyright Notice: Some items are not a licensed product and we do not claim ownership over the characters used. You are paying for our time, material and creative services to create a custom personal decoration.