When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
InSinkErator SS100-28 Commercial Food Waste Disposer — 1 HP — Tested & Cleaned — Parker Solenoid Included
Commercial InSinkErator SS100-28 food waste disposer with a 1 HP, single-phase motor and stainless steel housing. Tested on standard 120 V power and runs smoothly. Cleaned and descaled with citric acid, then rinsed repeatedly.
Includes the installed lower sink-mounting adapter, attached plumbing fittings, power cord with standard plug and inline electrical box, plus a separate Parker brass water-solenoid assembly.
Disposer specifications
Model: SS100-28 / SS-100
Motor: 1 HP, single-phase
Rated voltage: 115 / 208 / 230 V, depending on motor wiring
Corresponding rated amperage: 11.6 / 5.1 / 5.7 A
Frequency: 60 Hz
Motor speed: 1,725 RPM
Continuous-duty motor
Built-in thermal overload protection with manual reset
Serial number: 21081170359
Presently configured and tested for operation on standard 120 V power
Included with purchase
InSinkErator SS100-28 disposer
Installed lower #5 mounting flange/adapter and mounting gasket
Five of six adapter mounting screws; one screw is missing
Installed brass threaded water-inlet fitting
Attached PVC drain pipe
Power cord with standard plug and inline electrical box
Parker GP400 brass solenoid valve with G23 electrical coil and attached plumbing fittings
Parker Water-Solenoid Assembly
The Parker GP400 is an electrically operated, normally closed water valve. When connected to a compatible disposer control, it opens to supply flushing water while the disposer runs and closes when power to the valve is switched off. This automates water flow to help carry ground food waste through the drain.
Includes the G23 120/240 VAC coil and attached plumbing fittings. The assembly was working when removed from service but has not been independently retested.
Condition and mounting details
Used condition with cosmetic wear consistent with previous service. The disposer runs smoothly during testing. See photographs for the actual condition and included components.
The installed lower adapter is part of the #5 mounting system. The complete sink mounting assembly, including the sink strainer flange and remaining upper mounting components, is not included. The buyer will need mounting hardware compatible with their sink and installation.
Sale includes the disposer and accessories shown and identified above.
