When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
High Quality Checker Coil On Plug COP Ignition System Quick Tester
Pecification:
Item Type: Ignition Coil Tester
Material: ABS
Battery: CR2032 button battery, 120mAh (built-in)
How to Use:
1. Correctly connect the connector and sensor head to the tester
2. The induction head is aligned with the ignition coil to start working, and the working status of the ignition coil is judged according to the result of lighting
Test Results:
Red LED Light
Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage.
No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage.
This may be caused by one of the following:
1.Fouled , or incorrect gaps
2.Damaged/corroded wires or connectors
3.Faulty coil or PCM
Green LED light
Consistent and steady flashing indicates the duration of the arc is correct.
No response or an inconsistent response indicates the duration of the arc is NOT correct.
This may be caused by one of the following:
1.Shorted windings inside the coil
2. Resistance or bad connections in the
3. primary / secondary connections
4. Faulty coil
Package List:
1 x Ignition Coil Tester
1 x Adapter Lever
1 x Sensor
1 x Manual
1 x Storage Bag
