Replacement damper 2 wire spring motor actuator HONEYWELL ARD ZD M847D RZ3-1 For Sale

The Retrozone RZ3-1M 24 vac 2 wire spring return damper motors are designed as drop in replacements for Honeywell's M847D series motors on popular ZD and ARD dampers, including M847D1004, M847D1012, and other M847D series motors. These motors also replace most Honeywell 2 wire normally open, power to close spring return motors, as well as many other brands; and also replace the Hansen 135-6 motor, as well as other brands with the same footprint. The Retrozone RZ3-1M 24 vac 2 wire spring return damper motors are designed as drop in replacements for Honeywell's M847D series motors on popular ZD and ARD dampers, including M847D1004, M847D1012, and other M847D series motors. These motors also replace most Honeywell 2 wire normally open, power to close spring return motors, as well as many other brandsThese motors are also replacements for the Hansen 135-6 motor, as well as other brands with the same footprint - 1.33 or 1 5/16” center shaft to shaft spacing. Also works on these models:

• Jackson HD series;
• Jackson D XX series;
• Zonefirst ZDS;
• EWC URD;
• Robert Shaw DAR;
• Trol a temp RDMZ, RDMH, and MARD;
• Hansen;
• and many others.

Don't be left in the dark when your new motor, damper, transformer, or thermostat fail to work. Our handy 24 volt test light and troubleshooting guide, included with motor, allow you to test power to your motor and perform a complete diagnostic evaluation of your zoning system when used with our 2 page troubleshooting 24 VAC +/- 10%, 60 Hz, 0.36A

Torque Rating: Power open 32 in. oz./spring close 32 in. oz. - torque is consistently delivered throughout the full 90º rotational operating range to open and close the damper, irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized).

Speed Stroke: Motor driven 30 sec./spring return 6 sec.

Rotating Angle: 93.5º

Extremely reliable. Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over life of the actuator.

Noise Level: Very quiet operation, typically ≦ 40dB at 3’

Our all metal gears and precision engineering get rid of the failure prone thin metal or plastic OEM gears from Honeywell. Our gears are twice as wide as the new “improved” Honeywell plastic-covered motors. See the gear comparison in the product photos. We have also included photos of the motors that ours replace.Picture 1 shows the heavy duty replacement motor you will receive.
Picture 5 shows our heavy duty metal gear train.
Picture 7 shows the spacing, up to a 5/16 shaft.
Picture 8 show some of the motors the Retrozone RZ3-1M will replace.
Picture 9 shows two of the Honeywell motors the RZ3-1M will replace.These motors offer:
Less Cost;
Better Quality; and
Full 1 Year Warranty.Contact us via messages for quantity discounts on 10 or more motors.In addition to this motor, we also offer our BH KIT1 that comes with a Belimo, commercial grade, three wire motor. Check out item # 350842792511 in our damperdirect store.