When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Slip-on accessory adapter for unthreaded airgun barrels with outside diameters from 11mm to 17mm. Available in single-millimeter increments so the adapter fits snugly on your specific barrel. Output is the standard 1/2-20 UNF airgun accessory thread.
When You Need a Slip-On Adapter
Your barrel has no factory thread
You can\'t or don\'t want to thread the barrel
You want a removable adapter that leaves no permanent marks
How to Measure Your Barrel
Use digital calipers on the barrel end of your bare barrel [not the shroud or sight ramp]. Round to the nearest millimeter and select that size at checkout. If you\'re between sizes, choose the smaller one - the set screws take up the small remaining 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm inside diameter
Output: 1/2-20 UNF
Retention: dual M4 stainless set screws
Material: 6061-T6 aluminum, black hardcoat anodized
Pair with any 1/2-20 UNF airgun accessory. Assembled to order in Miami, FL.
Not sure if your specific model fits? Email us with the make, model, and a photo of your barrel - we\'ll confirm fitment before you order.
