When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Application for:
For GM Chevy 1997-2007 LS L92 L99 5.3L 5.7L 6.0L 6.2L
For 1997-2007 V8 LSx Sloppy Stage 2
Package Include:
1 x E-1840-P Camshaft
16 x LS7 Lifters
16 x Beehive Springs
2 x Multilayer Steel Cylinder Head Gaskets
30 x Cylinder Head Bolts
1 x Intake Seal Set
1 x Timing Cover Gasket Set
1 x Valley Cover Gasket
1 x Oil Pan Gasket
2 x Exhaust Manifold Gaskets
1 x Rear Main Seal
1 x Rear Main Cover Gasket
16x Pushrods
W/o Product Instruction
Note:
1.Please kingly check the fitment information of this set, using the drop down fitment chart to confirm the compatibility.
2.We always check every set before shipment, if there are any defects upon receiving or any other quality problems of our product, please kindly message us for a replacement or refund, we will solve your problems patiently.
Description:
The Sloppy Stage 2 Camshaft is a cam with a fairly aggressive profile. It will have a nice Lopey Idle and make tons of power all while keeping costs low. This cam is a great choice for those daily drivers that like a nice Lopey/Choppy idle. Great for Cars, Trucks, SUV's, Street Rods, and LS Swaps. There is no hiding this cam as will will have a muscle car sounds to it. Everyone will take note of this street warrior. Automatic's will perform best with a 2,600-2,800 Stall Converter.
1. Camshaft Compatibility:
for Chevy LS-Series Engine 1997-Up
Not for use with AFM/DOD
Camshaft RPM Range: 2200 to 5400 RPM
Camshaft Intake Valve Lift: .585"
Camshaft Exhaust Valve Lift: .585"
Camshaft Advertised Intake Duration: 283°
Camshaft Advertised Exhaust Duration: 286°
Camshaft Intake Duration at .050": 228°
Camshaft Exhaust Duration at .050": 230°
Camshaft Lobe Separation: 112°
Camshaft Intake Centerline: 108°
Camshaft Cam Gear Attachment: 3-Bolt
2. Number of Springs Per Valve: Single
Outside Diameter of Outer Spring (in): 1.290 in.
Spring Coil Bind Height (in): 1.140 in.
Damper Spring Included: No
Spring Install Load: 130lbs
Spring Install Height: 1.800"
Spring Open Height: 1.175"
Spring Open Load: 318 lbs
Spring Rate (lbs/in): 313 lbs./in.
Inside Diameter of Outer Spring (in): 0.885 in.
Valve Spring Style: Beehive
3. Set of 16 Elgin Roller Lifters for 1997-2015 Chevy/GM LS Series Factory Roller applications without Active Fuel Management.
3.Lifters Fitment includes:
1999-2012 Trucks/SUVs 4.8L V-8 VIN-V,C,A
1999-2007 Trucks/SUVs 5.3L V-8 VIN-T,Z,B
1997-2004 5.7L LS1 V-8
2001-2005 5.7L LS6 V-8
1999-2010 Trucks/SUVs 6.0L V-8 VIN-U,K
2005-2009 6.0L LS2 V-8
2008-2013 6.2L LS3 V-8; without AFM
2006-2013 7.0L LS7 V-8
Also fit Factory Roller 93-97 LT1, and 305-350 Chevy Engines.
4. putters
5/16" DIAMETER - 7.400" LENGTH - .080 WALL THICKNESS
Payment
Please confirm your shipping address at checkout. If your old address was imported from PayPal, please correct it before completing the payment.
Shipping
Free land shipping to U.S. mainland
Excluding Alaska, Hawaii, Puerto Rico, U.S. territories, APO/ FPO
Orders will be shipped Monday through Friday (except holidays). Orders placed before 3pm PST will be shipped the same day. Sometimes, however, due to unfortunate circumstances, we may have to delay shipment by a day.
The tracking number will be sent by email within one business day after the order is shipped. If you do not receive a tracking number, please contact our customer service team via .
For international orders: Import duties, taxes and brokerage fees for your country are not included in shipping costs. Please contact the shipping company and your local customs office regarding these fees.
Returns
Applicable for items purchased within 30 days.
* All item should be returned in a good/ well-packed condition. Failure to comply with our Terms and Conditions may lead to UNAPPROVED RETURNS.
* All returned merchandise must be in original factory carton, including all packaging materials, inserts and manuals, warranty cards (not filled-out) and all other accessories (i.e. screws, bass knobs, plastic coverings, protective films, etc.) Failure to meet any of these requirements will result in a higher restocking fee or denial of return request.
* All returned merchandise are to be tested and inspected according to reasons/ claims why it is being returned before any decisions will be made.
* Shipping charges are non-refundable. Only the purchase price of the product is refundable.
Reasons for unapproved returns
* Physical damage: Item is scratched, torn, wet, burned, blown, signs of misuse, and faulty installation DEFECTIVE or non DEFECTIVE
* Factory sealed items: If it’s opened and tampered except for certain items
