Taprite Dual Body CO2 Regulator - Triple Gauge, Two Outlet For Sale

• Individually adjustable dual outlets
• Precise and secure setting with screws and lock nuts
• Separate shut-off valves for each outlet
• Durable brass and steel construction

Our Taprite dual body CO2 dual body triple gauge regulator is perfect for busy coffee shops, cafes, and restaurants, in addition to dedicated beer pourers. It\'s the efficient way to pour more than one keg from a single tank, and one of our most requested items.

Need to serve two styles of beer requiring different PSI\'s from two kegs at once? Like to double up on your beer taps? Now you can, easy, fast and consistent. And no additional tank required. This stays on pressure even when your CO2 tank level goes down and is UL listed. Built-in 10 Micron Filter keeps contaminants out of the regulator.

Taprite dual body CO2 regulator gives two separate gas outs from a single tank. The PSI for each outlet can be set on its own, giving you max flexibilityfor your beverage setup, regardless of what you\'re drinking or pouring.

Carbon Dioxide regulators are gas cylinder regulators that control the amount of Co2 dispensed for various applications. Some CO2 regulators have flow restrictors that ensure delivery of the gas at a constant rate. These are often used inside draft beer kegerators to dispense just the right amount of the gas to get the perfect foam beer.

Maintaining accurate pressure in the tank is very important as it decides the quality of beer dispensed. To get that perfectly carbonated beer, the CO2 regulator must be set at an optimum pressure level.

When the pressure is too high, it results in an extremely foamy beer while on a lower pressure the excess foam looks loose and beer soon becomes flat. So, setting an optimum pressure in your CO2 regulator is important.

In order to adjust the level of gas pressure, you just need to close the shut-off valve placed on the bottom of the regulator that is connected to the hose which goes into the keg. After this, the screw can be turned clockwise or anticlockwise to increase or decrease the pressure respectively. Then, you would require expelling the pressure in the hose and opening the valve at the adjustable dual outletsSettingsPrecise and secure setting with screws and lock nutsShut-offsSeparate shut-off valves for each outletHigh-Quality ConstructionDurable brass and steel constructionDispensingHigh volume gas flow for steady dispensingRegulator SpecificationsFittingsCGA320 inlet fittingOutput Guage0-60 PSI line output gaugeTank Guage0-2000 PSI tank gaugePSIShut down blows off at 55-65 PSIService PSI0-120 PSI service pressure
Thank you and cheers!Beverage Elements