The Ravens Forge Eclipson Model B XL RC Airplane Kit with Floats For Sale

Absolutely. I’d use this title:

The Ravens Forge Eclipson Model B XL RC Airplane Kit with Floats

And here’s the revised listing copy:

Up for sale is a professionally 3D-printed Eclipson Model B XL RC airplane airframe kit with floats, produced by The Ravens Forge using a hybrid combination of standard PLA and lightweight LW-PLA.

The hybrid construction puts stronger material where durability matters while using LW-PLA throughout appropriate sections to reduce overall weight.

This is an unassembled airframe kit intended for experienced RC builders who want the Model B XL without spending dozens of hours printing the complete aircraft themselves.

With a wingspan of approximately 1500 mm / 60 inches, the Model B XL is a substantial bush-plane platform designed for slow flight, STOL-style flying, and backcountry-style operations.

• Complete left and right wing sections
• Fuselage stabilizer and elevator
• Vertical stabilizer and rudder
• Ailerons and flaps
• Printed control-surface components
• Servo mounting provisions
• Motor/firewall components
• Required printed structural components
• Complete printed float set
• Associated printed aircraft parts supplied with the kit

All printed components required for the airframe are included as supplied with this version of the Model B XL.

• Approximately 1500 mm / 60-inch wingspan
• Hybrid PLA / LW-PLA construction
• Large bush-plane design
• Excellent platform for slow flight and STOL-style operation
• Functional flaps
• Integrated servo mounting locations
• Modular printed construction
• Printed floats included
• Large airframe with plenty of room for your preferred electronics setup

This listing is for the printed airframe kit only.

Electronics and flight hardware are not included.

The builder will need to supply items such as:

• Brushless battery
• Transmitter and and such as CA and/or epoxy
• Screws, fasteners, and other required assembly hardware

This gives the builder the freedom to choose a power system and electronics package appropriate for their preferred flying style.

The Model B XL works well with a suitable 4S brushless power system and appropriately sized servos.

Because builders may choose different motors, batteries, landing configurations, and flying styles, final electronics selection and center-of-gravity setup remain the responsibility of the builder.

The aircraft arrives unassembled and ready to build.

Basic RC aircraft building tools and adhesives will be required.

Printed parts can be flown in their supplied finish or customized with paint, graphics, trim, or other finishing techniques if desired.

Minor cleanup or light sanding of printed surfaces may occasionally be desired as part of normal 3D-printed aircraft construction.

All printed components are NEW and produced specifically for the kit.

Each kit is printed, inspected, organized, and securely packed by The Ravens Forge before shipment.

Large printed RC aircraft require careful packaging.

The Model B XL components are individually organized and protected to minimize the possibility of damage during shipping. Large wing, fuselage, tail, and float components are packed with appropriate protection for transit.

The Model B XL is a seriously large 3D-printed aircraft.

Printing an airframe of this size requires substantial machine time, material, printer setup, monitoring, and successful production of many individual components.

The Ravens Forge does that work for you.

You receive a professionally printed and inspected Model B XL airframe ready for the enjoyable part — building, outfitting, and flying it.

With its large wingspan, functional flaps, hybrid lightweight construction, and included floats, this version makes an impressive bush-plane or float-plane project.

Printed and prepared by The Ravens Forge.