When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
USB Type C DC Cable+NB-10L Dummy Battery for Canon G1X G3X G15 G16 SX40 SX50 SX60 Powershot SX60HS Camera DR-80 DC Coupler
Specifications
Model: TC8V + DR-80
Input: PD 18W-65W
Output: DC 8.4V
Length: 120cm
Package Includes:
1 x PD Cable
1 x DC Coupler
1 x Manual
Work for:
For Canon Powershot SX40 HSFor Canon SX40For Canon SX40 HS SX40HSFor Canon Powershot SX50 HSFor Canon SX50For Canon SX50 HS SX50HSFor Canon Powershot SX60 HSFor Canon SX60For Canon SX60 HS SX60HSFor Canon Powershot G1 XFor Canon G1For Canon G1 X G1XFor Canon G3XFor Canon Powershot G15For Canon G15 G15For Canon Powershot G16For Canon G16 G16and more models.
important!
Please note that with some cameras, closing the camera battery door is a necessary step to use the DC adapter kit. Please refer to our operation manual for the installation example of the dummy battery.
Advantage:
1. The Camera PD-BX Convertor can't only play the role of power adapter,The convertor integrates 2 chips, one is used to identify PD and QC3.0/4.0 power, The other is used for 9V-24V wide voltage input, After the step-down treatment, the regulated output can effectively prevent high voltage, high current, and prevent short circuit, so it has multiple protection functions.2. High-quality chips,DC-DC converter,high conversion efficiency,Good stability,quiescent current is small,while also serving to effectively suppress harmonic current noise.Using a wide range,suitable for most 7.2V-8.4V and 9V camera.3. Compared with the ordinary USB Type-A (USB-A) power supply, the USB Type-C (USB-C) input PD power mode will get more power. Don't worry about the power bank will disconnect the power supply when the camera sleeps Output. If you use a Ordinary USB-A power supply,The camera will not be able to shoot at any time, when the camera is in smart sleep mode or standby mode, the Power bank usually disconnects the power output after one minute, which will miss the snapshot.4. Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.
After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.
