nVent RAYCHEM TraceTek TT1100-OHP-3M-PC 3-meter (10 ft) modular water-sensing For Sale

Tracetek TT1100-OHP water leak sensing cable is specially designed sensing cable for suspended pipes that provides detection of water at any point along its length. TT1100-OHP is installed with Tracetek sensor interface module for alarm and monitoring. This cable comes with an absorptive synthetic fiber braid designed to wick water along the cable even when the water leak is dripping from a single small pin hole or crack.
The nVent RAYCHEM TraceTek TT1100-OHP-3M-PC (frequently referenced via variants like TT1100-OHP) is a 3-meter (10 ft) modular water-sensing leak-detection cable featuring factory-installed plastic connectors (-PC). [1, 2]Specifically engineered by nVent RAYCHEM TraceTek for overhead and suspended piping, it uses conductive-polymer technology to detect water at any point along its entire length. [1, 2]🛠️ Key Technical Specifications

• Length: 3 meters (~10 feet), factory pre-terminated with modular plastic male/female connectors (-PC). [1, 2]
• Application: Ideal for overhead piping, data centers, mechanical plant rooms, and HVAC areas. [1, 2]
• Detection Principle: Conductive-polymer wires trigger an alert and pinpoint the leak location within ±1 meter accuracy when paired with a TraceTek Alarm/SIM Module. [1]
• Maximum Operating Temperature: 80°C (176°F). [1, 2]

🌟 Distinctive Features

• Absorptive Wicking Jacket: Wrapped in a heavy synthetic fiber braid that immediately absorbs and wicks droplets from small cracks or pinhole leaks, steering water directly to the sensing cores without needing secondary drip trays. [1, 2]
• Rapid-Drying Design: The protective fiber outer coating dries exceptionally fast once a leak is repaired, ensuring immediate reusability. [1, 2]
• Mechanical Armor: The over-braid layer adds advanced structural strength, protecting the internal wires from dusty construction environments and sharp pipe-lagging edges