When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Works for both positive ground or negative ground. Up to 355 Lumen output for brake light for White 6000K. Up to 358 Lumen output for brake light for Warm White 3000K. Up to 72 Lumen output for for brake light for Red. Up to 71 Lumen output for brake light for Yellow/Amber. Up to 84 Lumen output for brake light for Green. Up to 85 Lumen output for brake light for Blue. Up to 80 Lumen output for taillight for White 6000K. Up to 83 Lumen output for taillight for Warm White 3000K. Up to 26 Lumen output for taillight for Red. Up to 25 Lumen output for taillight for Yellow/Amber. Up to 29 Lumen output for taillight for Green. Up to 29 Lumen output for taillight for Blue. The viewing angle is 360 degree illumination. The bulb has two brightness levels for both taillight and brake light. Available in White 6000K, Warm White 3000K, Red, Yellow/Amber, Green and Blue. If the color is not listed then we are out of stock of that color and takes about 4 to 8 weeks to restock that color. The led bulb is made with the highest quality LED's for a long life. The bulb uses up to 2.6 watts. The socket is a BAY15D socket which is 15mm diameter and has the bayonets offset and two contacts on the bottom. The White 6000K bulb starts to light at 3.5 Volts. Operating this bulb 8 Volts or above will damage this bulb and void warranty. The bulb uses approximately
[email protected] Volts for the brake light and 90
[email protected] Volts for the taillight. After installation these led bulbs may cause hyper flashing. Long life up to 30,000 hours. The MOL is 1.47" from top to bottom. The diameter is 0.78". The led bulb is usually smaller than a incandescent bulb so you know that it will fit. The bulb only uses 2.6 Watts and is comparable to a 24 Watt incandescent bulb. These bulbs are designed for taillights and brake lights, i.e. a dual filament bulb. This LED bulb is designed for taillight and brake light. These LED bulbs do not have built in load equalizers and may require load equalizers to be installed to operate correctly. Please make sure the vehicle or motorcycle is approximately regulated to 6 volts. Every bulb is tested before shipping.The bulbs are warrantied for 1 year from date of purchase. Included two bulbs per package. CE and Rohs.