When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You are looking at the simplest andmost affordable way to add remote hydraulics to your Kubota tractor.Whether you’re planning to attach a hydraulic top link to your 3-point hitch, agrapple arm to your loader, or any other function, this simple system utilizes your existing loader controlvalve to control your remote cylinders.
No modification of yourhydraulic system is required
It doesn’t touch your electrical system
No drilling is required on tractors newer than 2003 - mounting bracket is included
With a simple push/pull of thevalve, you select which operation you’d like to control.Thevalve automatically holds the load on the inactive circuit, and you control theactive cylinder(s).The valve can be moved under load with just apull of your fingers, and the inactive cylinder is locked in place.Noneed to understand hydraulics or worry about compatibility of open/closedcenter systems, this system just plugs in, and can be installed or removed inunder 15 minutes.
This system works well with loaderinstalled or off (tractors newer than 2003), and retains the quick-install functionality for yourloader.All quick-connect connections are maintained, so you’llnever know this is installed, until you want to use it.
The factory rear remote kit can cost$1500+, other kits use complicated electronic solenoid valves, and some peoplehave hacked in to their hydraulic system to braze in connections –yikes!This kit is incredibly simple, and foolproof toinstall in 15 minutes.This is what I use on my personaltractor, and have installed on over 25 tractors now, with great results.I include photo instructions, and all the parts so that you can confidentlyinstall on your Kubota!
The Plug&Play Kitincludes everything from the economy kit, plus the Kubota-style quick connects to attach the valve kit to your hydraulic system without even turning a wrench. You'll just disconnect two quick-connect fittings to your loader, and pop this system in between those connections. In minutes!!
The Plug&Play Kit for Cab Tractorsincludes everything in the Plug&Play kit, with accessories and longer hoses to run controls in through an access port in the back of your cab. Same simple system, with a clean install inside your cab. ~1 hour install.
Compatibility:
- Kubota B, BX, L, LX, MX, and M Series tractors with factory front-end loaderinstalled (Complete compatibilitylist below)
- Please send me a message with the year and model # of your tractor, and the model # of your loader before I ship the kit, to make sure you get the perfect kit for your tractor.
Included in the kit:
- Switching Valve (Made in the USA, with warranty
- Hoses
- Fittings
- Mounting Bracket (2003 and later tractors)
- Hoses to front/rear of tractor
- Quick-Connect Ag-type fittings (Pioneer 4000 series - push-connect)
- Breakaway Quick-Connect Mounting
All hoses installed with proper sealant, and will install withjust connecting two hoses and mounting the valve - Economy kits can be installed in under 30 minutes, Pug-N-Play kits in under 15 minutes!
Video showing complete install and demonstration of the kit. 2nd video shows installation of the updated kit with NO DRILLING!
This kit is known to be compatible with the following models: It can be made compatible with lots of older tractors as well - I may just need a couple pictures of the connections. Contact me!
B SeriesL SeriesMX SeriesM
